Testimonials
"Our company has been using Timber Glow for over ten years on commercial and
domestic contracts. As a professional master painter running my own business I
can’t afford to use products that do not stand up to claims made for them.
In my experience over the time I have been using Timber Glow, I have
found it to be a premium quality timber coating that can always be used with
confidence.
The added bonus is ease of application and water clean-up,
with no solvent smell, as Timber Glow is water based. This makes it a great
product for the professional painter and also the home decorator to use.
We use Timber Glow on cladding, decking, doors and fibro cement, including
our work for the company Cedar Homes. We have always found that Timber Glow
stands the test of time and results in a great looking finished job and we
always recommend it to our customers."
Chris, Proprietor - (Astro Painting Contractors,
Dianella)
"When Timber Glow came onto the market some time in the middle of the 1980s,
we were asked to trial the product. We try to be a progressive painting company,
so we tested its performance against the products we had been using previously.
We used the product strictly to the manufacturers recommendations, (as we
do with all our coatings) i.e. 1-2 coats of sealer followed by a minimum of 2-3
coats of Timber Glow Top Coat to be sure our client would receive the full
“three year warranty.
We found the product better than other similar products on the market, some
cases outlasting some products by twice the period. Now where we can, we always
use Timber Glow for exterior timber and fibro surfaces, from ceiling linings,
eaves and gables to doors frames decking and pergolas. Anywhere where outdoor
exposure is a problem, we use Timberglow because from 20 years experience with
the product, we know it works. Paint Well!!!"
(D. Hardingham)
“After completing the building of our home in Kinross we were
disappointed with the Terracotta coloured Fibro cement cladding and the dreary
look of the treated pine picket fence. Someone suggested we paint and or stain
them both. Our dilemma, a product that looks good, has easy application,
compliments the house and is weather resistant. My wife and I had seen the
“wood look” on other houses. We finally tracked down Clive at Huletts Paints in
Wangara with his unique “Timber Glow” finish. We applied it to the cladding and
the picket fence, 1 undercoat and 2 coats of the “Timber Glow”….. the results
are sensational. “
(Wade Starr)
"Our company has been using Timber Glow for over ten years on commercial and
domestic contracts. As a professional master painter running my own business I
can’t afford to use products that do not stand up to claims made for them.
In my experience over the time I have been using Timber Glow, I have
found it to be a premium quality timber coating that can always be used with
confidence.
The added bonus is ease of application and water clean-up,
with no solvent smell, as Timber Glow is water based. This makes it a great
product for the professional painter and also the home decorator to use.
We use Timber Glow on cladding, decking, doors and fibro cement, including
our work for the company Cedar Homes. We have always found that Timber Glow
stands the test of time and results in a great looking finished job and we
always recommend it to our customers."
Chris, Proprietor - (Astro Painting Contractors,
Dianella)
"When Timber Glow came onto the market some time in the middle of the 1980s,
we were asked to trial the product. We try to be a progressive painting company,
so we tested its performance against the products we had been using previously.
We used the product strictly to the manufacturers recommendations, (as we
do with all our coatings) i.e. 1-2 coats of sealer followed by a minimum of 2-3
coats of Timber Glow Top Coat to be sure our client would receive the full
“three year warranty.
We found the product better than other similar products on the market, some
cases outlasting some products by twice the period. Now where we can, we always
use Timber Glow for exterior timber and fibro surfaces, from ceiling linings,
eaves and gables to doors frames decking and pergolas. Anywhere where outdoor
exposure is a problem, we use Timberglow because from 20 years experience with
the product, we know it works. Paint Well!!!"
(D. Hardingham)
“After completing the building of our home in Kinross we were
disappointed with the Terracotta coloured Fibro cement cladding and the dreary
look of the treated pine picket fence. Someone suggested we paint and or stain
them both. Our dilemma, a product that looks good, has easy application,
compliments the house and is weather resistant. My wife and I had seen the
“wood look” on other houses. We finally tracked down Clive at Huletts Paints in
Wangara with his unique “Timber Glow” finish. We applied it to the cladding and
the picket fence, 1 undercoat and 2 coats of the “Timber Glow”….. the results
are sensational. “
(Wade Starr)
