Call Us 08-9409 9948
TIMBER GLOW
Welcome to Timber Glow
Timber Glow® coating products are the most attractive coatings, by
appearance, for exterior timber. The range offers the longest possible coating
life without re-coat, and maintains effective UV protection for timber and fibro
cement. Suitable for application on timber clad homes, fencing, doors, exposed
beams, timber decking, garage doors, gazebos, pergolas, timber garden furniture,
on wall lining boards, lattice, and treated pine decking, the Timber Glow® range
of products are easy to use and even wash up in water!
Timber Glow is designed mainly for exterior use and is the ideal finish for all exterior timber, e.g..
Timber clad homes, pergolas, gazebos, fences, timber garden furniture and Thatch etc.
With superior waterproofing and UV resistant characteristics.
Material, provide a highly durable and long lasting finish.
.Pigmentation shading enhances the appearance of the finished coating to give an attractive look to Timber Glow finished work.
The product is and excellent finish to Fibrocement cladding, to waterproof, protect and give the appearance of timber.
The product is widely and successfully used on timber decking, but Timber Glow Pro is preferable on decks subject to extreme wear or
other adverse conditions.
These products offer many benefits their competitors cannot match! Timber Glow® products are;
Manufactured for Australian conditions and made in Australia, WA and Qld.
APPLICATION
The ideal system comprises, one coat of Timber Glow Timber Seal followed by Two to three coats of Timber Glow finish coat in your chosen shade.
The first application (Timber Seal) on sawn Western Red cedar and similar rough timbers should be thinned to a suitable degree to allow ease of application on the porous timber. For use on fine grained dressed timbers thinning should be to a maximum of 10% as required.
The first and second coats of top coat material can be applied without thinning although if desired thinning up to a maximum of 10% is recommended.
Apply thin coats with good quality paint brush, roller or spray. All North and West elevations Miniumin 3 Coats Timbre Gow including Decks.
Good painting practice recommends that when the product is applied by roller onto large areas, it should be 'laid off' with a good quality brush, to dispel any foaming,
unevenness or drips and runs that may be formed by the roller. The product dries quite quickly to its' final film and 'laying off' should follow the roller directly.
COVERAGE
Depending on porosity of timber the following can be considered as guides:
Dressed hardwoods
Primer 10- 14 m2 /L Top coat 10- 14m2 /L
Sawn Timber
Primer 6 - 10 m2 /L
Topcoat 8 - 10m /L
Drying time
Touch dry within a half hour, recoat no less than two hours depending on temperature and weather conditions.
Clean up
Clean all equipment immediately after use to prevent solidification of material particularly in application equipment.
Welcome to Timber Glow
Timber Glow® coating products are the most attractive coatings, by
appearance, for exterior timber. The range offers the longest possible coating
life without re-coat, and maintains effective UV protection for timber and fibro
cement. Suitable for application on timber clad homes, fencing, doors, exposed
beams, timber decking, garage doors, gazebos, pergolas, timber garden furniture,
on wall lining boards, lattice, and treated pine decking, the Timber Glow® range
of products are easy to use and even wash up in water!
Timber Glow is designed mainly for exterior use and is the ideal finish for all exterior timber, e.g..
Timber clad homes, pergolas, gazebos, fences, timber garden furniture and Thatch etc.
With superior waterproofing and UV resistant characteristics.
Material, provide a highly durable and long lasting finish.
.Pigmentation shading enhances the appearance of the finished coating to give an attractive look to Timber Glow finished work.
The product is and excellent finish to Fibrocement cladding, to waterproof, protect and give the appearance of timber.
The product is widely and successfully used on timber decking, but Timber Glow Pro is preferable on decks subject to extreme wear or
other adverse conditions.
These products offer many benefits their competitors cannot match! Timber Glow® products are;
Manufactured for Australian conditions and made in Australia, WA and Qld.
APPLICATION
The ideal system comprises, one coat of Timber Glow Timber Seal followed by Two to three coats of Timber Glow finish coat in your chosen shade.
The first application (Timber Seal) on sawn Western Red cedar and similar rough timbers should be thinned to a suitable degree to allow ease of application on the porous timber. For use on fine grained dressed timbers thinning should be to a maximum of 10% as required.
The first and second coats of top coat material can be applied without thinning although if desired thinning up to a maximum of 10% is recommended.
Apply thin coats with good quality paint brush, roller or spray. All North and West elevations Miniumin 3 Coats Timbre Gow including Decks.
Good painting practice recommends that when the product is applied by roller onto large areas, it should be 'laid off' with a good quality brush, to dispel any foaming,
unevenness or drips and runs that may be formed by the roller. The product dries quite quickly to its' final film and 'laying off' should follow the roller directly.
COVERAGE
Depending on porosity of timber the following can be considered as guides:
Dressed hardwoods
Primer 10- 14 m2 /L Top coat 10- 14m2 /L
Sawn Timber
Primer 6 - 10 m2 /L
Topcoat 8 - 10m /L
Drying time
Touch dry within a half hour, recoat no less than two hours depending on temperature and weather conditions.
Clean up
Clean all equipment immediately after use to prevent solidification of material particularly in application equipment.
|
|
|
|
